Our Blog

The words “overbite” and “overjet” certainly sound similar. Both conditions concern your front teeth. Both conditions fall under the same category of bite problems—Class II malocclusions, if you want to be technical. So it’s not surprising that they’re often used interchangeably. But while there are similarities, overbite and overjet are also distinctly different.

• Overbite/Overjet Geometry

In a healthy bite, the front top teeth project slightly beyond, and slightly overlap, the bottom teeth. The key word here is “slightly.” With a Class II malocclusion, the upper front teeth project further beyond the lower teeth than they should.

Of course, teeth and bites are as individual as we are, so there are variations in just how and just how much the overlap occurs. In diagnosing an overbite vs. an overjet, the difference comes down to a matter of vertical vs. horizontal.

An overbite, or deep bite, occurs when the top teeth vertically overlap the bottom teeth more than they should for a healthy bite. Generally, when a person’s top teeth cover more than a quarter of the bottom teeth when biting down, or more than two to three millimeters, that person is said to have an overbite.

An overjet, commonly known as protruding or buck teeth, is the result of a horizontal overlap that is broader than normal. This causes the top teeth to project outward toward the lips more than they do in a typical bite. An overjet is usually diagnosed when the horizontal distance between the top and bottom teeth exceeds two to three millimeters.

• Overbite/Overjet Causes

The causes for both an overbite and an overjet might be dental (caused by tooth alignment), or skeletal (caused by bone development), or a combination of both. These bite problems can run in families. They are also affected by the size and position of the jaws and the shape and position of the teeth.

Early oral habits, such as prolonged and vigorous thumb-sucking or pacifier use, can also contribute to the development of a Class II malocclusion, particularly an overjet. Consistent pressure from thump or pacifier pushes the teeth outward as they erupt, which encourages them to protrude. These oral habits can affect the shape of the palate and jaw, too.

• Overbite/Overjet Treatments

There are many types of treatment available to correct teeth and bite misalignments. Dr. Nathan Downey will tailor your treatment to your specific malocclusion for the best orthodontic outcome.

If you have a mild malocclusion, and minor dental issues are the main cause of that malocclusion, either braces or clear aligners can be effective for an overjet or an overbite. Elastics (rubber bands) are often used as part of this treatment.

If the malocclusion is due to bite problems caused by uneven upper and lower jaw development, devices called functional appliances can be used with braces to help guide the growth of the jawbones while young patients’ bones are still forming. These include appliances that work inside the mouth to help the upper and lower jaws grow proportionally, and external appliances such as headgear.

In some cases, where the malocclusion is skeletal in nature as well as dental, surgical treatment might be necessary to reshape the jawbone itself. Orthodontic treatment is usually needed as well both before and after surgery.

• Overbite/Overjet Consequences

Over time, a deep overbite can cause damaged gum tissue, worn enamel, and fractured teeth. When teeth protrude because of an overjet, they can lead to self-consciousness and are more at risk for injury. Both malocclusions share dental and medical consequences, including concerns about facial and jaw appearance, problems speaking or chewing, headaches, and face and jaw pain.

Class II malocclusions aren’t all the same, and orthodontic patients aren’t all the same either. You may have a minor malocclusion or a significant one. You may have an overbite, or an overjet, or a combination of different bite and alignment concerns. Your malocclusion may not bother you at all, or it may cause pain, discomfort, or self-consciousness.

That’s why every overbite or overjet should be evaluated by an orthodontist. When you visit our Bowling Green, OH orthodontic office, Dr. Nathan Downey will be able to diagnose the exact nature of your malocclusion, the reason for it, and your best individualized treatment plan. An overbite and an overjet are different malocclusions, but you and your orthodontist want the same outcome for each: a healthy, attractive, and confident smile!

Orthodontic treatment involves a lot more than just straightening your teeth. For a healthy smile, your bite must be healthy as well! This means that the upper and lower jaws need to fit together properly and comfortably.

If your bite is out of alignment because of jaw misalignment, orthodontic treatment can help correct the shape and position of your jaws with devices called functional appliances. These appliances are most often used for young patients whose bones are still growing, and are designed to treat malocclusions, or bite problems.

Common malocclusions such as overbites and overjets can occur when the upper teeth protrude further than they should, or the lower jaw is positioned too far back, or both. The Twin Block appliance can be used in such cases to help move your lower jaw and teeth into alignment with your upper jaw.

Why “Twin”? Because the Twin Block appliance is two separate pieces, each made of wire and smooth acrylic. Both pieces are crafted to fit precisely over your upper and lower arches and can be adjusted as your treatment progresses. The top plate can also be adjusted, if necessary, to widen the upper palate.

Why “Block”? Acrylic blocks cover the biting surfaces of several of your upper and lower teeth. These blocks fit together like a 3D puzzle. When you bite down, the upper blocks interlock with the lower blocks, pushing the lower blocks forward just a bit before you can bite down completely. Over time, bit by bit (and bite by bite), the Twin Block appliance advances your lower jaw and teeth to create a balanced, comfortable bite.

For the quickest and best results, you should wear your Twin Block appliance as directed. It’s made to be worn comfortably while you sleep, eat, and otherwise go about your day. (It’s a good idea to check with our Bowling Green, OH orthodontic team to see about removing it when you’re active, especially for swimming and contact sports.) When it’s time to brush, the Twin Block appliance is removable. This means that you can clean your teeth and your appliance easily.

And, while it’s made to work hard for you, it’s not indestructible. Don’t expose your appliance to heat or hot water, as the plastic may warp. Use the cleaning methods we recommend. Finally, when your appliance is out of your mouth, keep it in its case! You don’t want your appliance to end up carefully wrapped in a napkin in the nearby recycling bin. Or, even worse, in your dog’s mouth instead of yours.

The Twin Block appliance might fit together like a puzzle, but there’s nothing puzzling about how to achieve your best and fastest results. Your success really depends on you. Follow Dr. Nathan Downey and our team’s advice, wear your appliance as directed, and you’ll be on your way to a healthy, comfortable bite and an attractive, confident smile!

Your feedback is very important to us at Downey Orthodontics. We always want to make sure that our practice is meeting its full potential, so whether you’ve visited Dr. Nathan Downey once or been a loyal patient throughout the years, we encourage you to share your thoughts about your experience with us!

You can do this easily by giving us a review on our Facebook page or writing down your comments below. If you feel more comfortable, you’re always welcome to give our Bowling Green, OH office a call, too! We feel fortunate to have you all as patients and look forward to reading all your feedback!

Why do you chew gum? Perhaps because it’s a habit that comes with some healthy benefits. Chewing a stick or two reduces the urge to snack between meals. It’s a substitute for behaviors like nail biting that you’d like to change. It might even give you fresher breath after those tuna sandwiches in the cafeteria.

And, as it happens, chewing sugarless gum actually offers a few dental benefits as well! The act of chewing increases saliva production. Saliva washes away food particles, neutralizes acids in the mouth that can damage enamel, and even bathes the teeth in essential minerals that help strengthen weakened enamel. We’re talking about sugar-free gum here, of course, because regular gum will just bathe your teeth in sugar—no one’s idea of a dental benefit!

So why not open that pack and enjoy? Because, despite the many positive reasons you can think of for chewing gum, sometimes gum can have a negative impact on your braces.

• A Sticky Situation

Keeping your braces clean can be a bit of a challenge. That’s why you have special toothbrushes, flosses, and interproximal brushes to get rid of food particles that stick around after you eat. And, while any food can get caught in your braces, sugared gum, because it is so sticky, can stick to appliances much more easily and much more thoroughly than even sugar-free gum. You might be able to remove gum residue with regular brushing and flossing, but, worst case scenario, you might be looking at gum firmly stuck in the brackets or between the brackets and wires.

• Gumming Up the Works

Chewing gum can also affect your treatment time if the action of chewing causes your arch wire to bend. When your wire isn’t providing the proper shape or the right amount of tension, your teeth won’t get to where they need to be as quickly and efficiently. No piece of gum is worth discovering at your next appointment that you haven’t made any progress for weeks due to a damaged wire. And since chewing gum can also lead to loose brackets and bands, you might wonder if this sticky habit is ever worth the trouble it can cause.

• Something to Chew Over

Before you decide, talk to Dr. Nathan Downey! Chewing sugarless gum increases saliva production, which can help wash away food particles from your mouth and your braces. As an added benefit, the action of chewing for a few minutes after an appointment has been shown to reduce the discomfort of an adjustment. Because today’s braces are stronger and more durable, and sugarless gum much less likely to stick to them, we can let you know if chewing gum might be acceptable or even desirable depending on your specific treatment plan and your appliance.

Talk to us at your next appointment at our Bowling Green, OH office about gum chewing, and we’ll give you the very best recommendations for keeping your teeth healthy, your braces clean, your appliance intact, and your treatment plan on track. Even if gum needs to be off the menu for a while, what you’ll get in return—the best and fastest path to your beautiful smile—will be well worth it!